Distributed Control System & Motor Control Center Interface Philosophy
DCS and MCC Interface Philosophy is very important and the implementation of the system varies from plant to plant. Every drive in the plant is
DCS and MCC Interface Philosophy is very important and the implementation of the system varies from plant to plant. Every drive in the plant is
In this article, we will discuss the most important term-turn ratio of a transformer. You may find this term confusing if not understood conceptually. You
In this article, we will discuss the basic building blocks of the Fire Detection & Alarm System (FDAS). Before selecting a fire detection system, it
In this article, we will discuss the important points of PLC selection criteria. The PLC is the key equipment for plant automation and the smooth
In this article, we will discuss the causes of PLC stop mode from its run mode or program mode. Allen Bradley PLC has 3 modes.
In this article, we will discuss the CT ratio calculator and CT ratio calculation formula. The CT ratio is very important as a design factor
Proportional control is a process control technology that responses in proportion to the difference between the set point(SP) value and current value of the process variable(PV).
An electrical busbar consists of a metallic conductor in a shape like a bar or a strip enclosed in switch gear, panel boards, and busway
Faraday’s law of electromagnetic induction shows the relationship between magnetic field, electric current, and an electromotive force(EMF). In nature, there are two mutually dependent phenomena
UPS or Uninterruptible Power Supply is a device that is designed to supply continuous power to critical loads that must run without interruption. UPS system