Difference between Conductor and Insulator
The main difference between a conductor and an insulator is that the conductor allows the flow of electric current through it. whereas an insulator does
PLC Analog Input Scaling | PLC Conversion
In this article, we will discuss the PLC analog Input scaling and its importance. The analog input card of an Allen-Bradley SLC500 programmable logic controller
Watts to VA Conversion Calculator & Convert W to VA
In this article, we will discuss Watts to VA Conversion Calculator & Convert W to VA. Watt is the unit of real power and VA
What is Balance Load & Unbalance load?
The load can be classified as a balance load and unbalance load in a polyphase electric circuit. The polyphase has two or more phases. The
VA to Watts Conversion Calculator & Motor Power Chart
VA to watt conversion calculator calculates the real power in watts. VA is apparent power. The relationship between the real power(watts) and apparent power(VA) is
Normally-open and Normally-closed Switch Contacts
Normally open and normally closed switch contacts are the terminology used to describe the open and close positions of the switch in normal conditions. Here,
Difference between Open Circuit and Closed Circuit | Example
The main difference between the open circuit and a closed circuit is that electric current can not flow in an open circuit, whereas the electric
Open Circuit: What is it? (And How Does it Differ To a Short Circuit)
An open circuit is an electric circuit that does not allow the electric current to pass in the circuit. Contrary to an open circuit, a
Simplified Formulas for Parallel Circuit Resistance Calculations
In this article, we will discuss the formula of resistance in parallel connection. The resistances are connected in the series and parallel combinations to get
Installation precautions of RTD and Thermocouples
In this article, we will discuss the Installation precautions of RTD and Thermocouples. These two sensors are widely used for temperature measurement. An improper mounting