Total Harmonic Distortion(THD) & Its Measurement
Total harmonic distortion (THD) shows how much of a voltage or current distortion is due to harmonics in the signal. If the sinusoidal voltage is
Total harmonic distortion (THD) shows how much of a voltage or current distortion is due to harmonics in the signal. If the sinusoidal voltage is
When the live point of the electrical power supply system, which is at zero potential under normal condition, is connected to earth point is called
Adding inductive reactance from a neutral point to the ground is called reactance grounding. The inductive reactance is called the reactor. Using reactance it is
The current divider rule is used to find the current in the individual circuit when two or more circuit elements are connected in parallel with
This article aims to define active, reactive, and apparent power & their importance in an electrical circuit. Active Power Definition: The power which is actually
This article describes the difference between the locked rotor current and starting current of a motor. An induction motor takes about 5 to 7 times
In this article, we will discuss Anderson’s Bridge in electrical measurement. Here, we will cover the circuit diagram, equation, phasor diagram, and advantages and disadvantages
In this article, we will derive the energy stored in a capacitor formula. The type of energy stored in a capacitor is electrostatic potential energy.
In this article, we shall discuss the differences between Salient Pole & Non-Salient Pole Rotor. In electrical machines, the rotor is a moving or rotating
Source Transformation is a technique of replacing one source with an equivalent source. It is possible to replace a practical voltage source with an equal practical