What is Gas Leak Detection System?
A gas leak detection system is a part of a safety system and it detects the presence of stray gases in an area. The system
Pull Up Resistor- Working, Formula, and Applications
A pull up resistor is a passive element used in various digital electronic circuits to provide a reliable signal level. It is mainly used to
Transformer on NO Load Condition- Phasor Diagram of Transformer
A transformer on no load means its secondary winding is not connected to the electrical load and the current in the secondary winding is zero.
Multiplexer in Digital Electronics
In digital electronics, a multiplexer, also known as MUX, is a combinational logic circuit widely used in various operations, such as data selection, route signals,
Battery Life and Performance Factors
The life of a battery is adversely affected by several factors like cycle life, depth of discharge, recharge rate, and temperature. This article explains the
Shunt Resistor- Working, Specifications, and Applications
A shunt resistor is a passive electronic circuit element commonly used to detect current flow. Thus, it acts as a current-sensing resistor. The detection of
Voltage Doubler- Circuit Diagram, Half-Wave & Full-Wave
The voltage doubler produces two times DC voltage of the input AC peak voltage. This article describes the voltage doubler, its circuit diagram, types, working,
Voltage Drop: Definition, Formula, and Examples
Voltage drop is the amount of voltage reduction that occurs in all components of the circuit caused by impedance when current flows through it. Therefore,
Voltage Divider- Circuit, Equation, Applications, Solved Problem
A voltage divider circuit is formed using two resistors connected in the series, and the circuit outputs a portion of its input across resistors. Voltage
4 Most Common Types of Temperature Sensors
The 4 Most Common Types of Temperature Sensors are NTC thermistors, RTDs, Thermocouples, and semiconductor-based sensors. These sensors for temperature are used for monitoring and