10 Advantages of Alternating Current over Direct Current
This article describes the advantages of AC over DC. The alternating current is known as AC and the direct current is known as DC. Alternating
Difference between Solid and Stranded Wire
The two types of wires- solid wire and stranded wire are widely used in electrical systems. Wires are electrical conductors that carry the electric current
AC Power: What is it?
There are two types of voltage sources used in an electric circuit viz. AC source and DC source and electric power can be classified into
Hall Effect Sensor Working Principle and Applications
This article describes the Hall effect sensor working principle and applications. Hall Effect is named after Edwin H Hall who discovered the basic fundamental principle
Why 24 Volts DC Power Supply is Used?
This article describes reasons for the use of 24 volts DC power supply in electronics, instrumentation, and automation. As we know, all major industrial automation
Centre Tapped Transformer- Construction, Working & Applications
A centre tapped transformer has a center tap on its secondary windings. The center tap divides the secondary windings into two equal parts, and it
Dual Voltage Transformer
A dual voltage transformer is a type of transformer that has two different output voltages. A Dual voltage transformer has two separate winding that may
Power Transformer Explosion: Why it Happens & What to do?
Transformer explosion cause interruption of the power supply to facilities and buildings connected to the transformer. Therefore, we need to ensure the reliable operation of
Steps in PLC system Design
This article describes the major steps in PLC system design. Programmable Logic Controllers PLCs are an important component in industrial automation, and it is considered
Losses in Induction Motor
There are two types of losses that occur in induction motors are- fixed and variable loss. The fixed losses are core loss and mechanical loss,