Transformer Over Fluxing Protection
The transformer over-fluxing protection protects the core from overheating caused by over-fluxing. The voltage and frequency ratio(v/f) is responsible for over-fluxing in the transformer. In
The transformer over-fluxing protection protects the core from overheating caused by over-fluxing. The voltage and frequency ratio(v/f) is responsible for over-fluxing in the transformer. In
How does the transformer work? The transformer has two coils wound around a common magnetic core. When an alternating voltage is applied to the primary
The DC series motor attains dangerously high speed when we run it on no load. The main reason for overspeeding is that at no load,
In star delta starting, the phase voltage is 58 % of the line voltage when the motor is first connected in the star connection. The
In this post, we will discuss the construction, speed control, and characteristics of DC shunt motors. Construction of Shunt DC Motor The field winding of
What is Skewing of Rotor Slots? As shown in the above picture, the rotor bars of an induction motor are not parallel with the shaft,
Introduction to Star Delta starter: Star delta starters are widely used to start a three-phase induction motor. In star-delta starting, the motor is first connected
Difference Between Ohmic and non-Ohmic Conductors: Ohmic Conductors: The conductors that obey the ohm’s law are called ohmic conductors. In an ohmic conductor, the current
Direct online starter is a method of starting an induction motor. The stator of the motor receives the full supply voltage in the DOL starter.
In this article, we will explore the difference between grounding and neutral in electrical systems. While grounding and earthing may seem like interchangeable terms, there